Features - MUTOH vj-1617h Operation Manual

Product overview VJ-1617H OPERATION MANUAL
2.1

Features

This section explains the main features of the printer.
(1) Wide range of media - thicknesses
Height adjustment mechanism of the print head now supports rigid media of up to a thickness of 15.0
*1
mm.
A wide variety of media of a thickness of 0.08 mm to 15.0 mm is supported.
*1 : Hard media such as a board is described as "rigid media" in this manual.
(2) Wide range of media - materials
Rubber rollers adopted in the feeding mechanism have realized feeding rigid media such as glass.
(3) Wide range of media - colors
MP11 white ink is supported. (Only when using 5-color set) Use white ink as the base when printing on
transparent or colored media to improve color development. (Dedicated RIP software is required). White
ink uses twice as many nozzles as other colors; you can perform more dense white printing.
(4) Simple heaters
Newly developed Blower heater is mounted.The heating system has been made simpler without any
ancillary facilities such as compressor or air dryer.
(5) LED pointer embedded
Embedded LED pointer has made it easy to change the origin point for printing. By saving the changed
origin position, it has also been made easy to print on the same position repeatedly.
(6) Improved Media-feed table functions (optional)
Embedded rollers in Media-feed table have improved the feeding accuracy for rigid media.
(7) Compact and light Spectrophotometer (optional)
A compact and light Spectrophotometer (SPECTROVUE VM-10) to measure visible light ranging from
400 nm to 700 nm can be directly connected to the printer.Spectrophotometer can be used as a
colorimeter for color calibration or color profiling. (Color calibration and profiling depend on the RIP
software functions being used.)
Install Spectrophotometer on Print head to measure the color target automatically.
2-2