Oil Alert System - Hyundai HY1000Si User Manual

If the overload indicator light (RED) is on, disconnect the electrical appliances first, then press
and hold the reset button for 1 second. If the overload indicator light (RED) is off and the
output indicator light (GREEN) is on, reconnect the electrical appliances. Otherwise stop the
engine and check the generator.
OVERLOAD
INDICATOR
LIGHT (RED)
HY1000Si
NOTE
When you start the engine, it is normal for both the overload indicator light (RED) and output
indicator light (GREEN) to be ON simultaneously. The overload indicator light will go OFF after 5
seconds, otherwise contact your dealer.

6.4 Oil Alert System.

The oil alert system is designed to prevent engine damage caused by an insufficient amount of oil
in the crankcase. Before the oil level in the crankcase falls below a safe limit, the oil alert system
will automatically shut down the engine (the engine switch remains in the "ON" position).
If the oil alert system shuts down the engine, the oil alert indicator light (red) will be on. Check
the engine oil level.
OIL ALERT INDICATOR LIGHT
(RED)
OUTPUT
INDICATOR
LIGHT (GREEN)
HY1000Si
PAGE 17
OVERLOAD
INDICATOR
LIGHT (RED)
HY2000Si
OIL ALERT INDICATOR LIGHT (RED)
HY2000Si
OUTPUT
INDICATOR
LIGHT (GREEN)