Output And Overload Indicator; Oil Alert System - Hyundai HY4000SEi User Manual

6.3) Output and Overload Indicator

In normal operating, output indicator light
(green) will remain on.
If the generator is overload (over 3.5kVA), or the
connected appliance is short-circuit, the output
indicator light (green) is off, and overload
indicator light (red) is on. The AC output will be
switched off, but engine is still running.
If the overload indicator light (red) is
disconnect the electrical appliances firstly, then
stop the engine, and start it again. If the overload
indicator light (red) is OFF and the output
indicator light (green) is ON, reconnect the
electrical appliances. Otherwise stop the engine
and check the generator.
OVERLOAD INDICATOR OUTPUT INDICATOR
LIGHT(RED) LIGHT (GREEN)
6.4)

Oil alert system

The oil alert system is designed to prevent engine
damage caused by an insufficient amount of oil
in the crankcase. Before the oil level in the
crankcase falls below a safe limit, ECU
system will automatically shut down the engine
(the engine switch remains in the "On" or
"RUN/ REMOTE " position).
If the oil alert system shuts down the engine, the
oil alert indicator light (red) will be on. Check
on ,
the engine oil level.
OIL ALERT INDICATOR
LIGHT (RED)
<<22>>