Table of Contents
Advertisement
Kickstand retention assembly
Description
Kickstand retention assembly (includes left and right assemblies)
Before removing the kickstand retention assembly, follow these steps:
1.
Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then
shut it down through the operating system.
2.
Disconnect the power from the slate by unplugging the power cord from the slate.
3.
Disconnect all external devices from the slate.
4.
Remove the display panel assembly (see
5.
Remove the speakers (see
Remove the kickstand retention assembly:
1.
Remove the four Phillips PM2.0×4.5 screws (1) that secure the kickstand retention assemblies to
the back cover.
2.
Remove the kickstand retention assemblies (2).
Reverse this procedure to install the kickstand retention assemblies.
Display panel assembly on page
Speakers on page
29).
Spare part number
830339-001
20).
Component replacement procedures
39
Hide quick links:
Advertisement
Table of Contents
