Battery - HP Spectre x2 Maintenance And Service Manual

12. Remove the display panel assembly (4).
Reverse this procedure to install the display panel assembly.

Battery

Description
3-cell, 42-Wh, 3.69-Ah, Li-ion battery (includes cable)
Before removing the battery, follow these steps:
1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then
shut it down through the operating system.
2. Disconnect the power from the slate by unplugging the power cord from the slate.
3. Disconnect all external devices from the slate.
4. Remove the display panel assembly (see
Remove the battery:
1. Remove the six Phillips M2.0×3.5 screws (1) that secure the battery to the back cover.
Display panel assembly on page
Component replacement procedures
Spare part number
814060-850
20).
23