Logc5 Or Logf5 Placement Guide - Kingsman VFI25 Installation Instructions Manual

LOGC5 OR LOGF5 PLACEMENT GUIDE

C5 or F5 Parts
Step 1: Break ember wool into thumbnail
size pieces. Place glowing embers evenly on
to the front burner tube as shown.
Step 3: Place Log #3 onto the notched areas
as shown. Place Log #4 onto the notched
areas as shown. (Refer to step 2 for notched
area locations).
Burner
Step 2: Place Log #1 on burner as shown
and pull forward to the grate bars. Place log
#2 on rear log holder and center it.
Step 4: Place lava rock around the sides and
the front of the burner as shown. Sprinkle ver-
miculite over top of the lava rock as shown.
(Do not place lava rock or vermiculite on the
burner tube areas).
11