Ftb (Fade To Black) - Panasonic AV-HS410N Operating Instructions Manual

1. Basic operations

1-7. FTB (Fade to Black)

The user can fade out from a program image to the black
screen or fade in to a program image from a black screen.
1 Set the duration of the transition.
Press the t button to light its indicator, and display the
Time menu.
2 Use [F1] to display the FTB sub menu.
As with a background transition, set the transition time.
 Refer to "1-1-6. Auto transition".
N/R R
WIPE DIRECTION
BKGD KEY
MIX MIX
WIPE WIPE
MIX WIPE
CUT AUTO
3 When the [FTB ON] button in the transition area is
pressed, fade-out to the black screen is initiated for the
length of the transition time that has been set.
During fade-out, the indicator of the [FTB ON] button
blinks in red, and it lights in red when the transition
(fade-out) is completed, and the black screen is
displayed.*
When the [FTB ON] button is pressed with the black
screen displayed, fade-in to the program image is
initiated.
During fade-in, the indicator of the [FTB ON] button
lights in red, and it goes off when the transition (fade-in)
is completed.
If the [FTB ON] button is pressed at any point during a
transition, the direction of the transition is reversed.
*: I n the FTB status, the crosspoint button which is
normally lit in red lights in amber.
Selecting the image
The image to be used for fading out can be selected.
KEY FTB
ON
ON
PinP1 PinP2
ON ON
DSK
ON
40
1 Press the s button to light its indicator, and display the
Config menu.
2 Use [F1] to display the Assign sub menu.
3 Use [F2] to select the image to appear when fading out
using the FTB Source item.
Still1 The still image video memory (Still1) is used.
Still2 The still image video memory (Still2) is used.
Clip1
The moving image video memory (Clip1) is
used.
Clip2
The moving image video memory (Clip2) is
used.
CBGD1
The color background is used.
CBGD2
White
White background
Black Black background
 If a setting other than "White" or "Black" has been
selected using the FTB Source item, the corresponding
crosspoint button will light in red in the FTB status.