Panasonic AV-HS410N Operating Instructions Manual page 128

5. Setting menu table
Sub menu
Menu
Use [F1] to select.
Multi View Display MV Split
MV Pattern 1/4 Parameter
MV Pattern 2/4 Parameter
MV Pattern 3/4 Parameter
MV Pattern 4/4 Parameter
MV Frame
Display
Parameter 1
Use [F2] to select. Use [F3] to select. Use [F4] to select. Use [F5] to select.
Parameter
Split
Setting range
4Split,
5-aSplit,
5-bSplit,
6-aSplit,
6-bSplit,
9Split,
10-aSplit,
10-bSplit,
16Split
Default value
10-aSplit
Pos1Signal
Setting range
SDI IN1 to 8, DVI IN, IN-A1, IN-A2, IN-B1, IN-B2, CBGD1, CBGD2,
Still1V, Still1K, Still2V, Still2K, Clip1V, Clip1K, Clip2V, Clip2K, PGM,
PVW, MEM-PVW, Key Out, AUX1 to 4, Clock
Default value
PGM
Pos5Signal
Setting range
The setting range is the same as for the MV Pattern 1/4 sub menu.
Default value
SDI IN3
Pos9Signal
Setting range
The setting range is the same as for the MV Pattern 1/4 sub menu.
Default value
SDI IN7
Pos13Signal
Setting range
The setting range is the same as for the MV Pattern 1/4 sub menu.
Default value
Still2V
Parameter
Frame
Setting range
LUM0%,
LUM25%,
LUM50%,
LUM75%,
LUM100%,
Off
Default value
LUM75%
Parameter
Level Meter
Setting range
On, Off
Default value
Off
128
Parameter 2 Parameter 3
Pos2Signal Pos3Signal
PVW SDI IN1
Pos6Signal Pos7Signal
SDI IN4 SDI IN5
Pos10Signal Pos11Signal
SDI IN8 DVI IN
Pos14Signal Pos15Signal
Clip1V Clip2V
Character Label
LUM0%, On, Off
LUM25%,
LUM50%,
LUM75%,
LUM100%,
Off
LUM75% On
Input Status Marker
On, Off 4:3, 16:9, Off
On Off
Parameter 4
Pos4Signal
SDI IN2
Pos8Signal
SDI IN6
Pos12Signal
Still1V
Pos16Signal
AUX1
Tally
Red,
Red+Green,
Off
Red+Green
Marker Size
80 to 100%
95%