Memory Card - Panasonic AV-HS410N Operating Instructions Manual

1. Basic operations

1-12. Memory card

The unit's video memory data and setup data can be stored
on memory card.
Conversely, this data can be loaded from the memory card to
the unit.
Furthermore, it is possible to upgrade the unit's software.
p  It may take a while to store a moving image of a long
recording time with high image quality or a still image file
with high image quality on the memory card.
(Approximately 10 minutes is necessary when data with
total size of about 490 MB stored in "All file" is saved to a
Panasonic Class 8 SDHC memory card.)
Video memory (still image data: Still1, Still2):
<File formats supported>
Bitmap (bmp), JPEG (jpg), TARGA (tga), TIFF (tif), GIF (gif),
PNG (png)
 This unit supports 24-bit uncompressed or 32-bit
uncompressed TARGA files.
If any other types of TARGA files are loaded into the unit,
black images will be displayed as the thumbnails, and
the unit cannot recognize the files.
 Be aware that saving video memory still images on the
memory card in GIF format will cause the picture quality
to deteriorate.
<Applicable sizes>
HD/1080i: 19201080
HD/1080PsF: 19201080
HD/720p: 1280720
SD/NTSC: 720487
SD/PAL: 720576
 The size of images is converted automatically if it does
not match any of the "applicable sizes".
 The pixels of images in SD format are not square, so
the aspect ratio will be different when the images are
displayed on the computer and when they are imported
into video memory (with NTSC format, they will be
vertically long).
To keep the images true to their actual proportions, make
sure the original size is 720
are in NTSC format, use images shrunk to 720
pixels. If the images are in PAL format, use images

enlarged to 720 576 pixels.
Video memories (moving image data: Clip1, Clip2):
This is the original format of the unit.
Data is stored in and read from these memories.
Shot memory data (Shot):
Data is stored in and read from these memories.
Event memory data (Event):
Data is stored in and read from these memories.
 540 pixels. If the images

487
Setup data (Set Up):
The "setup data" refers to all the data stored in the unit with
the exception of the following data.
The extension used for the setup data files is "h41".
Date, time, network settings, video memory data,
shot memory data, event memory data
All file (All):
All the following data is stored.
Video memory data, shot memory data, event memory data,
setup data
Plug-in software (Plug-in):
The plug-in software data is loaded.
It cannot be stored.
Software for upgrading (Upgrade):
The software for upgrading is loaded.
This software can be obtained from "Service and Support"
on the home page whose address is provided below:
http://pro-av.panasonic.net/
For the upgrade procedure, follow the steps in the
directions which are contained in the download file.
Log file (Log):
Log files stored in the unit can be saved.
 Concerning memory cards
p
Memory cards used with the unit should conform to SD or
SDHC standards.
Be sure to format cards using the unit.
Memory cards with the following capacity can be used for
the unit.
SDXC memory cards are not available for this product.
SD (from 8 MB to 2 GB)
SDHC (from 4 GB to 32 GB)
For the latest information not available in the Operating
Instructions, visit the following Web sites.
http://pro-av.panasonic.net/
p  Memory cards must not be used or stored in an
environment where they may be
• Exposed to high temperatures/humidities;
• Exposed to water droplets; or
• Electrically charged.
66