Lan; Editor; Com - Panasonic AV-HS410N Operating Instructions Manual

4. External interfaces

4-2. LAN

Connect the unit and computer or the unit and an external
device*.
*: A n external device can be controlled from the unit.
p  Use a crossover cable (category 5 or above) when
connecting the equipment directly.
p  Use a straight cable (category 5 or above) when
connecting the equipment through a hub (switching hub).
p  It supports plug-in software.

4-3. EDITOR

The unit can be controlled by an external device by
connecting the device to the EDITOR connector.
p  It supports plug-in software.
Use it with the settings below.
Baud rate:
38400 bps
Character length: 8 bit
Parity:
Odd
Stop bit:
1 bit
Flow control: None
5
RS-422, D-sub 9-pin, female, inch screw
Pin No. Signal name
1 FRAME GROUND
2 TXD –
3 RXD +
4 GROUND
5 NC
6 GROUND
7 TXD +
8 RXD –
9 FRAME GROUND
4 3 2 1
9 8 7 6
Description of signal
Frame ground
Send data (–)
Receive data (+)
Ground
Not used
Ground
Send data (+)
Receive data (–)
Frame ground

4-4. COM

An external device can be controlled from the unit.
p  It supports plug-in software.
The communication system can be selected using the setting
menu.
1 Press the s button to light its indicator, and display the
Config menu.
2 Use [F1] to display the COM-Port sub menu.
3 Use [F2] to select the communication system using the
Mode item.
Mode: 1
(default setting)
Baud rate 9600 bps
Character
length
Parity
Stop bit
Flow control
RS-422, D-sub 9-pin, female, inch screw
Pin No. Signal name
1 FRAME GROUND
2 RXD –
3 TXD +
4 GROUND
5 NC
6 GROUND
7 RXD +
8 TXD –
9 FRAME GROUND
p  The pin assignment is different from that of the EDITOR
connector.
114
Mode: 2
38400 bps
8 bit 8 bit
None Odd
1 bit 1 bit
None None
5 4 3 2 1
9 8 7 6
Description of signal
Frame ground
Receive data (–)
Send data (+)
Ground
Not used
Ground
Receive data (+)
Send data (–)
Frame ground
Mode: 3
38400 bps
8 bit
None
1 bit
None