Loading Data From Memory Cards - Panasonic AV-HS410N Operating Instructions Manual

1. Basic operations

1-12-3. Loading data from memory cards

1 Insert the memory card on which the data is stored into
the memory card slot.
Load the file after its data has been stored in the each
folder.
Data stored in other folders will not be recognized by
the unit.
F or the destinations where the data is stored, refer to
<Data folder configuration>.
2 On the SD Card menu, use [F1] to display the File1 sub
menu.
3 Use [F2] to select "Load" using the Mode item, and then
press the [F2].
When [F2] is pressed, the file selection screen is
displayed.
<Example of what appears on the file selection screen>
4 Use [F1] to select the type of file to be loaded using the
SELECT item.
 Correlation between [F1] (for selecting a setting
using the SELECT item) and [F3] on the file
selection screen
[F1]
Settings selected
using SELECT item
F3: LIST VIEW
Still1, Still2,
Clip1, Clip2 Using the [F3], it is possible to switch
the screen display between
"List (list files)" and "Thumbnail (display
thumbnails)".
Shot, Event, Set Up, F3:
All, Upgrade The [F3] cannot be operated.
On the screen, the list of files is
displayed.
Plug-in F3: INDEX
Using the [F3], it is possible to select
the index number (1 to 10) of the files
to be loaded.
On the screen, the list of files is
displayed.
[F3]
Displays and function
5 Use [F2] to select the name of the file to be loaded
using the SELECT FILE item.
If the name of the file to be loaded consists of more
than 8 characters, a shortened version of the filename
will be displayed.
 When "Plug-in" has been selected using [F1]
(SELECT item), use [F3] to select the index number
(1 to 10) of the files to be loaded.
 Up to 100 files can be loaded from one folder.
 The following alphanumerics and symbols can be
used as the characters for filenames (see below).
Files using other characters will not be displayed by
the unit.
<Characters which can be used for filenames>
A to Z, a to z, 0 to 9, ! # $ % & ' ( ) - . @ ^ _ ` { }
6 Use [F4] to load the file.
Thumbnail display
For Still thumbnails, the image is displayed in the upper
portion, and the file name, KEY indicator, image size, and file
date are displayed in the lower portion.
For Clip thumbnails, a still image is displayed in the upper
portion, and the file name, KEY indicator, recorded time
(number of frames), format, and file date are displayed in the
lower portion.
A maximum of up to 100 Still thumbnails and 100 Clip
thumbnails can be displayed.
On a single screen, 8 thumbnails are displayed in 2 rows of 4
thumbnails each. For more than 8 thumbnails, thumbnails are
switched one row at a time.
When moving the cursor with [F2] (the SELECT item), if the
cursor is at the image in the lower-right corner (or upper-left
corner), moving to the right (or left) switches pages.
p  Never remove the memory card while thumbnail display is
in progress.
69