Panasonic AV-HS410N Operating Instructions Manual page 111

4. External interfaces
w Control using the GPI Input port
Assign Item
AUTO AUTO button in transition area
CUT CUT button in transition area
KEY ON KEY ON button in transition area
DSK ON DSK ON button in transition area
PinP1 ON PinP1 ON button in transition area
PinP2 ON PinP2 ON button in transition area
FTB FTB button in transition area
BKGD AUTO AUTO button when the background is selected
BKGD CUT CUT button when the background is selected
KEY AUTO AUTO button when the key is selected
KEY CUT CUT button when the key is selected
REC Still1 Still1 recording
REC Still2 Still2 recording
REC Clip1 Clip1 recording start
REC Clip2 Clip2 recording start
STOP Clip1 Clip1 recording stop or playback stop
STOP Clip2 Clip2 recording stop or playback stop
PLAY Clip1 Clip1 playback start
PLAY Clip2 Clip2 playback start
AUX XPT Crosspoint buttons (1 to 24) used to switch the AUX buses.
1 to 24  S elect the AUX buses (AUX1 to AUX4) to be controlled using the
menu.
REDTly DSBL Red tally signal is not output
GRNTly DSBL Green tally signal is not output
AUXTly DSBL AUX tally signal is not output
No Assign No function assigned
 When a plug-in software application is introduced, the functions inherent to that application are sometimes added as the
functions which are assigned.
Description of function assigned
111
Control method
Operations are performed using
contact inputs (30 ms or more).
Functions are enabled using
contact inputs (or disabled in open
status).