Panasonic AV-HS410N Operating Instructions Manual page 54

1. Basic operations
<Timeline displays (on the built-in display)>
A green "" below the timeline indicates an event point.
A green "||" indicates that "PAUSE" has been set for an event
point.
If an edit point is over an event point, "" or "||" for the event
point is indicated in amber.
When "CLIP" (Clip1, Clip2) has been registered in an event,
" " appears above the event point.
Similarly, when "GPI-Out" (GPI-O1 to GPI-O19) has been
registered in an event, " " appears above the event point.
The timeline axis is indicated in green from the start event to
the end event.
During playback, the part from the beginning to the current
position is indicated in red.
Similarly, during reverse playback, the part from the end to
the current position is indicated in red.
p  When registering "CLIP" (Clip1, Clip2) to event memory,
clips might not play back from the Current time item (in the
Video Memory3 sub menu of the Video Memory menu) of
Clip1 (or Clip2).
Clip playback is linked to the following items of the Video
Memory menu:
p  Current time item of the Video Memory3 sub menu
p  Mode item of the Clip1 Play Mode sub menu
p  Mode item of the Clip2 Play Mode sub menu
For example, for forward playback, Current time is placed
at the beginning (from the Video Memory2 sub menu,
press [F2] (LEAD)).
When playing back in reverse, place Current time at the
end (from the Video Memory2 sub menu, press [F3]
(LAST)).
w Number key operations
7 8
NEW COPY
STILL 1
STILL 2
4 5
INS DEL
CLIP 1 CLIP 2
1 2
＜ ＞
＜ ＞
0/10 .
＜＜ ＞＞
＜＜ ＞＞
MEMORY / WIPE PATTERN / 10 KEY
Creates a new timeline.
7
Copies events.
8
An event is not copied if an edit point is not over the event.
Pastes the copied events.
9
If the edit point is an event point, the event is inserted after
the event point.
If the edit point is at any midway position in an event, the
event is inserted at the edit point.
Inserts events.
4
If the edit point is an event point, the event is inserted after
the event point.
If the edit point is at any midway position in an event, the
event is inserted at the edit point.
Deletes events.
5
Modifies events.
6
This key cannot be operated if the edit point is not over the
event point.
Moves to the start event point.
0
Moves to the end event point.
.
Moves to the next event point.
2
Moves to the previous event point.
1
Reverses the playback direction (event numbers are put in
3
their reverse sequence).
Undoes the editing operation of the event.
C
When the button is pressed, the operation performed last
is canceled.
Plays back events.
T
When this button is operational, its indicator lights in amber.
Each time it is pressed, operation is switched between
playback and pause.
During playback, its indicator blinks in green; during pause,
it blinks in amber.
54
9
MENU
XPT
DSBL INPUT
PASTE
TRIM IN REC
6 +
�
/
VMEM
PAGE
MOD
TRIM OUT STOP
3
BKGD
PATT
REV
TAKE
REV ENTER
C KEY
PATT
UNDO
TRIM OFF PLAY