Panasonic AV-HS410N Operating Instructions Manual page 112

4. External interfaces
w Output from the GPI Output port
Assign Item
CUT Cut transition executed
KEY ON Key transition start
DSK ON DSK transition start
PinP1 ON PinP1 transition start
PinP2 ON PinP2 transition start
FTB ON FTB transition start
BKGD CUT Cut transition for the background executed
KEY CUT Cut transition for a key executed
EVENTMEM Event set by event memory executed
AUTO Auto transition execution in progress
BKGD AUTO Auto transition execution in progress for background
KEY AUTO Auto transition execution in progress for key
KEY Trans Transition execution in progress for key
DSK Trans Transition execution in progress for DSK
PinP1 Trans Transition execution in progress for PinP1
PinP2 Trans Transition execution in progress for PinP2
FTB Trans Transition execution in progress for FTB
REDTly1 to 13 Red tally for INPUT1 to INPUT13*
GRNTly1 to 13 Green tally for INPUT1 to INPUT13*
AUXTly1 to 13 When INPUT1 to INPUT13* have been selected by the AUX bus
 S elect the AUX buses (AUX1 to AUX4) whose signals are to be
output using the menu.
No Assign No function assigned
*: The following inputs are used for INPUT1 to INPUT13.
p  INPUT1 to INPUT8: SDI IN1 to SDI IN8
p  INPUT9:
p  INPUT10, INPUT11: IN A1, IN A2
p  INPUT12, INPUT13: IN B1, IN B2
 When a plug-in software application is introduced, the functions inherent to that application are sometimes added as the
functions which are assigned.
Description of function assigned
DVI IN
Low pulses are output
(approx. 50 to 60 ms).
A low level is output.
A low level is output during tally
output.
A low level is output while the inputs
are selected.
112
Output