Basic Menu Operations; Menu Configuration And Operations - Panasonic AV-HS410N Operating Instructions Manual

2. Preparations

2-2. Basic menu operations

This section describes the basic operations of the menus which are displayed on the built‑in display.
For more details, refer to <Operations and Settings>.
For the menu configuration, refer to "5. Setting menu table" in <Operations and Settings>.

2-2-1. Menu configuration and operations

1
Press the [MENU MODE] button to show the menu on the built-in display.
 Refer to "1‑1‑5. Display area".
2
Select the menu for each function using the menu selection buttons (MENU SELECT) that corresponds
to the function concerned.
Each time the button is pressed, the menu of the function displayed at the top of the button and the menu of the function
displayed at the bottom are switched.
The button of a selected menu lights up in amber.
3
3
Use the rotary encoders [F1] to [F5] to select more detailed settings.
[F1] : Turn this rotary encoder to select the sub menu.
[F2] to [F5] : Use (press or turn) these rotary encoders to set the parameters.
For further details, refer to the next page.
Sub menu
Operate here
using [F1].
p  The Input and Output menus will differ depending on whether an option board has been installed in the unit.
F1 F2 F3 F4
Operate here
using [F2].
U1 U2 U3
1
BKGD
MENU
PICT
MODE
CBGD
WFM VMEM
MENU
OFF
VECT SD Card
DISPLAY
7
SHOT
STORE
MEM
NEW
STILL 1
4
EVENT RE
MEM CALL
INS
CLIP 1
1
PLUGIN
DEL
MEM1
＜
＜
PLUGIN 0/10
EDIT
MEM2 ＜＜
＜＜
F5
MEMORY / WIPE PATTERN / 10 KEY
Parameter setting area
Operate here
using [F3].
Operate here
using [F4].
29
Live Switcher AV-HS410
U4 U5 U6 U7 U8
2
USER BUTTON
KEY PinP1
TIME PLUGIN
DSK
CHRKEY PinP2
SHOT XPT IN CONFIG
MENU
HOLD
EVENT MV OUT SYS
MENU SELECT
8 9
XPT MENU
DSBL INPUT
COPY PASTE
STILL 2 TRIM IN REC
5 6
� / +
VMEM
PAGE
DEL MOD
CLIP 2 TRIM OUT STOP
2 3
BKGD
PATT
＞ REV
TAKE
＞ REV ENTER
C KEY
.
PATT
＞＞ UNDO
＞＞ TRIM OFF PLAY
Operate here
using [F5].