Sharp MX-M264N Operation Manual page 151

Special Modes
Margin Shift
2
Pamphlet Copy
Covers/Inserts
Book Copy
3
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [START] key.
Copying will begin.
If you are using the document glass, change originals and press the [START] key. Repeat until all pages have been scanned
and then touch the [Read-End] key.
The following screen appears when the [START] key is pressed.
After the message appears, tandem copying begins.
4
If tandem copying is not possible, the following screen appears.
To have the master machine make all copies, touch the [OK] key. To cancel the job, touch the [Cancel] key.
• To cancel scanning...
Press the [STOP] key (
• To cancel tandem copying...
Touch the [STOP] keys (
(2) (3)
OK
Dual Page
Erase
Copy
1
Job Tandem
2
Build Copy
Transparency
Multi Shot
Inserts
Tab Copy Card Shot
) and then enter the correct number.
Starting tandem operation.
Please wait.
Tandem output is not allowed.
Output all sets using master machine?
(Cancel will delete the job.)
).
) on both the master machine and the slave machine.
Select tandem copy.
(1) Touch the [Special Modes] key.
☞
SPECIAL MODES
(2) Touch the [Tandem Copy] key so that it is
highlighted.
(3) Touch the [OK] key.
You will return to the base screen of copy mode.
Set the number of copies (number of
sets) with the numeric keys.
Up to 999 copies (sets) can be set. When the [START] key is
pressed, the copies will automatically be divided between the
master and slave machines.
If an odd number of copies is set, the master machine will print
the extra set.
OK Cancel
2-53
COPIER
(page 2-37)
Contents