Printer Specifications - Sharp MX-M264N Operation Manual

PRINTER SPECIFICATIONS

Type
Continuous printing speed
Printing resolution
Printer driver type
Supported protocols
Supported client PC
operating systems
Fonts
Interface port
Memory
Print area
*1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*2 Barcode font kit is required.
Built-in
MX-M264N: 26 pages/min
MX-M314N: 31 pages/min
MX-M354N: 35 pages/min
(When printing same document continuously on 8-1/2"x11" (A4) plain paper in non-offset mode,
excluding processing time.)
600x600 dpi, 1200x600 dpi
PCL6, PostScript 3 compatible*
TCP/IP, IPX/SPX, NetBEUI, EtherTalk*
See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide.
PCL6
1
PostScript 3 compatible*
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)
Standard system memory: 2GB
Entire page excluding margin of 11/64" (4.2mm) at each edge. The actual print area may vary
depending on the printer driver and the software application.
3-74
1
1
80 European fonts, 28 barcode fonts*
136 European fonts
PRINTER
2
, 1 bitmap font
Contents