Ducati superbike 899 panigale Owner's Manual page 132

Viewing/deleting the DDA memory
This function allows displaying the DDA memory
status and erasing the stored data.
To enter this function gain access to the SETTING
MENU, and keys (1) and (2) to select the DDA
indication, then press button (4).
When entering this function the DDA memory status
is displayed in percentage followed by the steady ON
message "MEMORY" and the memory status value
(in percentage):
- 0 means that the DDA memory is empty;
- XX means that the DDA memory is used for the
indicated XX value;
- 100 means that the DDA memory is full.
With DDA OFF, you can delete the memory. Select
the flashing option ERASE by pressing button (1) or
(2).
Press CONFIRM MENU (4) for at least 2 seconds to
confirm.
After 2 seconds, the instrument panel will display the
flashing dashes "- - - - -" for as long as the deletion is
completed (from 1 to 128 seconds according to the
quantity of data to be deleted).
132
If deletion is successful, the instrument panel will
read OK for 2 seconds and refresh the memory status
displayed. If deletion is not successful, the
instrument panel will still show memory used status.
To exit the menu and go back to previous page, select
"EXIT" and press button (4).
Attention
If the DDA is set to "ON" the deletion is inhibited
and you can not even select the ERASE option.