Setting the unit of measurement: Restore
automatic settings
This function allows you to restore the automatic
settings for the units of measurement of all
indications displayed on the instrument panel.
To enter this function gain access to the SETTING
MENU, and keys (1) and (2) to select the UNT
indication, then press button (4). Select DEFAULT
4
option, by pressing button (1) or (2).
Once the DEFAULT (D) function is highlighted, press
CONFIRM MENU button (4) for 2 seconds. After 2
seconds the display shows the message DEFAULT
and its box steady ON for 2 seconds. Then EXIT
indication is automatically highlighted.
To exit the menu and go back to previous page, select
EXIT and press button (4).
4
4
Fig 92
164