Automatic Scene Detection - Panasonic LUMIX DMC-ZS100 Owner's Manual

Flash
ZS100
When the flash is open, the camera automatically sets [
Reduction), [ ], or [
ZS60
When is pressed and [
[ ], [ ] (Auto/Red-Eye Reduction), [
and brightness.
●
When [ ] or [
detect red-eye and correct the picture data.
●
When [ ] or [

Automatic Scene Detection

When taking pictures
[i-Portrait]
[i-Night Scenery]
[i-Sunset]
*
1
Displayed only when using flash.
*
2
When [iHandheld Night Shot] is [ON].
*
3
When children (that are registered in the camera with Face Recognition) under 3 years old are
recognized.
• When the camera identifies [
that jitter is reduced by the use of a tripod or by other means, a shutter speed that
is slower than usual is selected. After pressing the shutter button, do not move the
camera while recording.
• When recording 4K photos or when recording using [Post Focus], Scene Detection
works the same way as when recording motion pictures.
When recording motion pictures
[i-Portrait]
When scene does not correspond to any of the above
●
Depending on recording conditions, different scene types may be determined for the same
subject.
90
Taking pictures with automatic settings (Intelligent Auto Mode)
] based on the type of subject and brightness.
] (i auto) selected, the camera will automatically be set to
] is displayed, the [Red-Eye Removal] function is activated to automatically
] is selected, the shutter speed is reduced.
[i-Scenery]
[i-Handheld Night
*
2
Shot]
When scene does not correspond to any of the above
(→91)
] as the optimal scene and if the camera determines
[i-Scenery]
], [
], or [ ], depending on the type of subject
[i-Macro]
[i-Food]
[i-Low Light]
Recording mode
] (Auto/Red-Eye
[i-Night Portrait]
*
[i-Baby] 3
[i-Macro]
*
1
SQW0547