Automatic Scene Detection; About The Happy Colour Setting; [Motion Deblur] - Panasonic LUMIX DMC-TZ25 Operating Instructions Manual

Camera reads scene when pointed at subject, and makes optimum settings automatically.
The icon of
scene detected
∗
1
When babies (under 3 years) that are registered with the Face Recognition function are recognised
∗
2 We recommend using a tripod and the self-timer.
∗
3
When [iHandheld Nite Shot] is [ON]
●
Depending on recording conditions, different scene types may be determined for the
same subject.
●
If desired scene type is not selected, we recommend manually selecting the appropriate
recording mode.
●
When , or
exposure are adjusted for the recognised faces.
●
About Backlight Compensation
Backlight is a condition where a light shines from behind a subject. When there is a
backlight, a subject appears darker and the camera automatically corrects the exposure
by increasing the brightness of an entire image. When the camera detects backlight,
is displayed on the LCD monitor.
When [Color Mode] (→88) is set to [Happy], pictures are recorded with vivid colouring.
The camera automatically sets the optimum shutter speed in accordance with the
movements of the subject to minimise the blur of the subject.
■
Settings
Press [MENU/SET]
Press to select [Rec] menu and press [MENU/SET]
Press to select [Motion Deblur] and press [MENU/SET]
Press to select [ON] and press [MENU/SET]
●
When [Motion Deblur] is set to [ON],
●
The subject may be recorded in a picture size smaller than the number of pixels that
has been set.
Taking pictures with automatic settings [Intelligent Auto] Mode

Automatic Scene Detection

Recognises people
Recognises babies
Recognises landscapes
Recognises night scenes and people in them
(Only when
Recognises night scenes
Recognises night scenes without a tripod.
Recognises close-ups
Recognises sunsets
Reads subject movement to avoid blurring when scene does
not correspond to any of the above.
is detected, Face Detection is activated, and the focus and

About the Happy colour setting

[Motion Deblur]

∗
1
∗
2
is selected)
∗
2
appears on the screen.
- 25 -
∗
3