Table of Contents
Advertisement
Adjusting the flash output
Recording mode:
Adjust the flash output if a picture taken using the flash is too bright or too dark.
1
Set the menu
TZ100/TZ101
→
TZ80/TZ81/TZ82
→
2
Press
to set the flash output and press [MENU/SET]
Settings: -2 EV to +2 EV (unit: 1/3 EV)
When you do not want to adjust the intensity of the flash, select [±0 EV].
●
When the intensity of the flash is adjusted, [+] or [-] is displayed on the flash icon.
250
[Rec] → [Flash] → [Flash Adjust.]
[Rec] → [Flash Adjust.]
Stabiliser, Zoom and Flash
Setting the Flash Functions
DVQP1246
Advertisement
Table of Contents
