Troubleshooting - Sony NXCAM HXR-NX100 Operating Manual

Troubleshooting

Troubleshooting
If you run into any problems using your camcorder, follow the flow chart below.
1 Check your camcorder, referring to the items on pages 93 to 99.
2 Disconnect the power source, reconnect the power source after about 1 minute and turn
on your camcorder.
(OTHERS) t INITIALIZE.
3 Select
This operation will reset the date, time and area settings.
4 Consult your Sony dealer or local authorized Sony service facility.
• Power sources/LCD screen/Wireless Remote Commander (p. 93)
• Memory cards (p. 94)
• Recording (p. 95)
• Playback (p. 97)
• Connecting to TV (p. 98)
• Copying/Editing/Connecting to other devices (p. 98)
• Connecting to a computer (p. 99)
Power sources/LCD screen/Wireless Remote Commander
The power does not turn on or abruptly turns off.
• Attach a charged battery pack to the camcorder (p. 19).
• Use the AC Adaptor to connect the camcorder to a wall outlet (wall socket) (p. 19).
The camcorder does not operate even when the power is set to on.
• Disconnect the power source (battery or AC Adaptor), then reconnect it after about 1 minute.
(OTHERS) t INITIALIZE.
• Select
The camcorder gets warm.
• Camera body may get warm with use – this is normal.
The remaining battery indicator does not indicate the correct figure.
• Ambient temperature is too high or too low, or the battery pack has not been charged enough.
This is not a malfunction.
• Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace
with a new battery (p. 19, 108).
• The indicated figure may not be correct in certain circumstances. For example, when you
open or close the LCD screen, it takes about 1 minute to display the correct remaining
battery.
93
Continued ,