Troubleshooting - Sony Handycam DCR-DVD92 Operating Manual

Troubleshooting
I1 you run into any problems using your camcorder, use the lollowing table to troubleshool
the problem. ]f the problem persisls, remove the power source and contact your Sony dealer.
The camcorder does not operate even when the power is set to on.
• Disconnect the AC Ad:q)tor from the _all outlet or remove the battery pack, then reconnect it
after about 1minute. If the l]mctions still do not work, press the RESET button (p.37) using
a sharp-pointed obiect. (lfyou press the RESET button, all settings, including the clock
setting, are reset, except the Personal Menu items.)
• The temperature of your camcorder is extremely high. Ttlrn off your camcorder and leave it
for a while in a cool place.
Buttons do not work.
• During Easy Handycam operation, the available buttons are limited. Cancel Easy Handycam
operation (p.27).
You cannot turn the Easy Handycam operation on or off.
• During recording or communicating _ith another dc'_ice via USB cable, you cannot turn
Easy Handycam operation on or oft'. Cancel Easy Handycam operation (p.27).
Settings change during Easy Handycam operation.
• Some of the settings of your camcorder are restored to the del, lult setting when you set Easy
Handycam operation (p.27).
[DEMO MODE] does not start.
• You cannot _ie_ the demonstration when the NIGHTSHOT or N[(;HTSHOT PLUS s_xitch
is set to ON. Set the N[GHTSHOT or NIGHTSHOT PLUS sx_ itch to OFF (p.35).
• Remove the disc from your camcorder (p.24).
Your camcorder vibrates.
• Vibration occurs depending on the condition of the disc. This is not a mall_mction.
A vibration is felt in your hand or a faint sound is heard during operation.
• This is not a mall_lnction.
A motor sound is heard from your camcorder periodically.
• This is not a mallhnction.
Your camcorder gets hot during use for a long period.
• This is not a mallhnction. Turn off your camcorder and leave it for a _hile in a cool phice.
=_
=.
g
87