Sony NXCAM HXR-NX100 Operating Manual page 29

2
Turn the ON/STANDBY switch to ON (❙).
3
Press the START/STOP button (or the handle record button) to start
recording.
The recording lamps light up during recording.
To stop the movie recording, press the START/STOP button or the handle record button
again.
b Notes
• When the access lamp is lit or flashing in red, your camcorder is reading or writing data on recording
media. Do not shake or apply strong force to your camcorder, do not turn the power off, and do not
remove the recording media, battery pack or the AC Adaptor. The image data may be destroyed.
• See page 103 about the recording time of movies.
• If a movie file size exceeds 2 GB while recording in DV or AVCHD format, the camcorder automatically
divides the file and creates a new one.
• If a movie file size exceeds 6 hours duration while recording in XAVC S HD format, the camcorder
automatically divides the file and creates a new one.
• The menu settings, picture profile settings, and settings made using the AUTO/MAN switch are saved
when you turn the camcorder off by setting the ON/STANDBY switch to STANDBY (1). The POWER/
CHG lamp flashes while the settings are being stored.
[STBY] t [REC]
29
Continued ,