Sony NXCAM HXR-NX100 Operating Manual page 83

INT MIC SET
x INT MIC SENS
You can set the audio recording sensitivity of
the internal microphone.
B NORMAL
Sensitivity generally used for professional-
use devices.
HIGH
Sensitivity generally used for consumer-
use devices.
x INT MIC WIND
You can attenuate low tone input sound in the
internal microphone to reduce wind noise.
B OFF
Disables wind noise reduction.
ON ( )
Enables wind noise reduction.
XLR SET
INPUT CH SELECT
x
Selects the signals for recording to CH-1 and
CH-2 (p. 42).
INPUT1/INPUT1
Records the input on INPUT1 signal to
both CH-1 and CH-2.
B INPUT1/INPUT2
Records the INPUT1 signal to CH-1, and
the INPUT2 signal to CH-2.
XLR AGC LINK
x
Links/unlinks the AGC (Auto Gain Control) of
CH-1 and CH-2 when using an external
microphone.
B SEPARATE
Unlinks AGC (CH-1 and CH-2 are
recorded with separate AGC).
LINKED ( )
Links AGC (CH-1 and CH-2 are recorded
with linked AGC, like stereo).
appears on the status check screen.
b Note
• Available when the same source (LINE/MIC/
MIC+48V) is selected on both INPUT1 and
INPUT2 switches, and the AUTO/MAN
switches for both CH-1 and CH-2 are set to
"AUTO" (p. 42).
INPUT1 TRIM
x
Adjusts the input signal level when recording
the signal from the INPUT1 jack.
–18dB, –12dB, –6dB, B0dB, +6dB,
+12dB
b Note
• This setting is disabled when the INPUT1
switch is set to "LINE."
x INPUT1 WIND
B OFF
Disables the wind noise reduction function
for the INPUT1 jack.
ON
Activates the wind noise reduction
function for the INPUT1 jack.
appears on the status check screen.
b Note
• This setting is disabled when the INPUT1
switch is set to "LINE."
83
Continued ,