Table of Contents
Advertisement
®
SDI Module Features
The reliability of T-Series SDI Modules stem from the quality of its design and construction, featuring
advanced, integrated re-clocking circuitry designed into the transmitter and receiver. In addition,
equalized and re-driven SDI loop-through is provided on the transmitter. These key features provide
assurance that the signal is equalized and re-clocked prior to fiber transmission, thus retaining all of the
signal's initial parameters and allowing for pristine, re-clocked SDI outputs on the receiver.
Installation possibilities are expanded with built-in support for either multi-mode or single mode fiber,
making this a convenient and cost effective solution to combat the restrictions inherent in the distribution
of uncompressed broadcast-quality video signals over long distances. In addition, the standard SFP+
optics with LC connectors are hot swappable/pluggable. When using a return-channel fiber, an RS-422
connector provides a full duplex channel to send/receive data, making it ideal for remote camera
operations (such as pan, tilt and zoom), and access to video and audio player/recorder control functions.
T-Series SDI Modules, Rev. A
5
September 2011
Advertisement
Table of Contents
Need help?
Do you have a question about the T-4200 and is the answer not in the manual?
Questions and answers