Installing The Memory (Ddr Dimm) - VIA Technologies IB781 User Manual

INSTALLATIONS

Installing the Memory (DDR DIMM)

The IB781 board supports one 184-pin DDR DIMM socket for a
maximum total memory of 1GB in DDR DRAM type. The memory
module capacities supported are 64MB, 128MB, 256MB, 512MB and
1GB.
Installing and Removing DIMMs
To install the DDR DIMM, locate the memory slot on the board and
perform the following steps:
1. Hold the DIMM so that the two keys of the DIMM align with those on
the memory slot.
2. Gently push the DIMM in an upright position until the clips of the slot
close to hold the DIMM in place when the DIMM touches the bottom
of the slot.
3. To remove the DDR module, press the clips with both hands.
Lock
Lock
6
DDR Module
Top View of DIMM Socket
IB781 User' s Manual
Lock
Lock