VIA Technologies IB781 User Manual page 50

DRIVERS INSTALLATION
VIA 4in1 Drivers Installation
The VIA 4in1 Driver, to be installed first before the software drivers,
will enable Plug & Play INF support for VIA chipset components.
Follow the instructions below to complete the installation under
Windows 98SE/ME/2000/XP.
1. Insert the CD that comes with the motherboard and the screen below
would appear. Click VIA ChipsetsèVIA CLE266 Chipset
DriverèCLE266+VT8237 Chipset DriversèVIA 4 IN 1 Drivers.
2. When the welcome screen appears, click Next to continue.
3. Click Yes to agree with the license agreement and README and to
continue.
4. Select Normal Installation (in the 4in1 Setup Mode Option screen) and
click Next to continue.
5. Click on all checkboxes and click Next to continue. This will install
the following:
- VIA PCI IDE Bus Driver
- AGP Driver (AGP3.0 Supported)
- VIA INF Driver 1.80a
6. Click on "Install VIA PCI IDE Bus Driver" to install it and click Next
to continue.
7. Click on "Install AGP driver" to install the driver and click Next to
continue.
8. Click OK to restart the computer when prompted.
46 IB781 User' s Manual