Power Switch/Led Assembly - HP PRO 3380 Maintenance & Service Manual

Power Switch/LED Assembly

Description
Power switch/LED assembly
1. Prepare the computer for disassembly
2. Remove the access panel
3. Lay the computer on its side with the front facing toward you.
4. Remove the front bezel
5. Remove the optical drive
6. Disconnect the braided cables from the black system board connector labeled JFP1.
7. Remove the cable from the clips in the optical drive cage.
Figure 7-39
(Access Panel on page
(Front Bezel on page
(Removing an Optical Drive on page
Power switch cable routing
(Preparation for Disassembly on page
43).
45).
Spare part number
657105-001
42).
67).
Power Switch/LED Assembly 79