Rename Rfid Tag; Entry And Exit Delay Time; Siren Volume And Ringing Time; Change The Password - eTIGER S3b Sim Secual Manual

Rename RFID Tag

Send:
10
Rename RFID tags:
1.
2.
3.
4.
Copy, paste, then edit
(case sensitive):
Rename RFID tags:
1.Tom
2.Nurse
3.Nancy
4.David
Ok
Note
The first SMS number will receive SMS
notifications when the system is disarmed
by RFID tag.
If the RFID tag that disarms the system has
been renamed, the SMS notification will
be "Tag 01 Tag name Disarm". ("01" is the
number of the tag)
Other tags will be attributed a number
based on the order of registration to the
control panel; the SMS notifications will in
such case be "Tag-04 Disarm" ("04" is the
number of the tag). Refer to the instructions
on page 27 to learn how to register an
RFID tag in the control panel.
16

Entry and Exit Delay Time

Send:
11
Entry delay time(0-300sec):0
Exit delay time(0-300sec):0
Copy, paste, then edit
(case sensitive):
Entry delay time(0-300sec):10
Exit delay time(0-300sec):20
Ok
Note
This function will only affect detectors
assigned to the Delay zone. Refer to the
instructions on page 28 of this manual to
learn how to set up your sensor to the Delay
zone.
This function can be used if you do not want to
bring a remote control or a RFID tag with you.
When you arm the system, the system
will be armed after the delay set. When
you disarm the system, the system will be
disarmed after the delay set.
When arming the system, you hear one
beep every second to remind you to leave.
The beep rhythm speeds up during the last
10 seconds. If an intruder is detected, the
alarm will be delayed accordingly.

Siren Volume and Ringing Time

Send:
12
Siren volume(0=Mute,1=High):1
Siren ringing time(1-9min):3
Copy, paste, then edit
(case sensitive):
Siren volume(0=Mute,1=High):0
Siren ringing time(1-9min):1
Ok

Change the Password

Send:
13
Disarm password (4 digits):
1234
Copy, paste, then edit
(case sensitive):
Disarm password (4 digits):
8888
Ok
17