Control Panel Operations; Arm The System; Disarm The System; Home Mode - eTIGER S3b Sim Secual Manual

Hide thumbs Also See for S3b Sim Secual:

Table of Contents

Control Panel Operations

Press the Arm button " " on the control panel. The control panel beeps once: the system is

armed.

Note

If the Entry / Exit Delay is activated, only the Delay zone will be armed after the delay set (refer

to instructions on page 16 of this manual "Entry / Exit Delay").

Type your password and press the Disarm button " " on the control panel. The control panel

beeps twice: the system is disarmed.

Press the Stay button " " on the control panel. The control panel beeps twice: the system is

armed in Home Mode.

In Home Mode, all the sensors are armed except those assigned to the Home zone. Sensors

assigned to the Home Mode zone are disarmed: they cannot trigger an alarm.

For more information on zone setup, please refer to the instructions on page 28 of this

manual.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the S3b Sim Secual and is the answer not in the manual?