Features Control Panel Layout (Back) ARM CPU + Auror CPU MIC Siren / Speaker Tamper Switch Loudspeaker SIM Card Slot GSM frequency: 850 / 900 / 1800 / 1900 MHz, suits all phones Supports up to 10 remote controls, 50 wireless accessories and 50 RFID tags Radio-frequency security of the accessories: more than one million code combinations Input for Wired Sensors Built-in siren (110dB) and call function from the panel...
RFID Tag SMS Operations Request the Menu The RFID tag can disarm the system and Send: unlock the electronic door (if connected to a Important wireless keyboard). You can rename RFID tags and store a mobile phone number that will Nancy Insert a SIM card in the control panel receive an SMS notification when the system...
Home Mode Call Back to Record a Voice Memo Store Phone Numbers Send: Send: Send: Send: The system sends the third part of the menu: ‘91~99’ Zone name‘ The system will call you back. Pick up the ‘10’ RFID tags SMS notice System in home mode.
Store Alert SMS Number Store SMS No. for RFID Tags Notifications Store Speed Dial Phone Number Change Zone Name Send: Send: Send: Send 91~99. For example for zone 1, send: SMS: SMS No. for RFID tags: Speed dial phone number: Zone 1 name : Zone 1 alarm (0-20 digits):1 (0-20 digits):1...
SMS Alert for Accessory Low Battery Rename RFID Tag for SMS Notice Entry and Exit Delay Time Siren Volume and Ringing Time (available for two-way acessories such as Motion Detectors) Send: Send: Send: For accessories assigned to zones that have been renamed, an SMS will be sent under the format “Zone name + low battery”.
Disarm Password Single Zone Delay Time Change system language Delete RFID Tags by SMS Send: Send: Send “0033” to set the language system as Send: French 0033 Disarm password (4-6 digits): Single zone delay time Delete RFID tags successfully Réglage de la langue “français” 1234 (0-300 sec.): réussi.
If so, they are Product name LED indicator registered. If not, the registration has failed; Disarm Call the control panel number and hang up S3 Sim Secual register them again. when you hear the ring tone: the system is Panic armed. Model...
Zone Setup of Wireless Accessories Wireless Door / Window Contact Installation Home Mode Open the case and remove the battery activation strip. Every detector can be assigned to 4 Features Mount the sensor on the door and the magnet different categories of zones: Home Mode on the door frame.
LED indications Mode Setting Housing material If two detectors are installed in the same ABS plastic detection scope, adjust the location to avoid Blinks continuously: self-testing interferences and false alarms. Operating temperature Blinks once: an intruder is detected -10°C~55°C Blinks twice: self-testing is complete; entering working mode.
Need help?
Do you have a question about the S3 Sim Secual and is the answer not in the manual?
Questions and answers