First Operations; Arm / Disarm The System; Register Wireless Accessories And Rfid Tags; Speed Dial - eTIGER S3b Sim Secual Manual

First Operations

Store a phone number
To interact with the control panel by SMS, by phone call and/or from the app, at least one phone
number for SMS notifications must be stored in the control panel. Please refer to the instructions page
13 of this manual.
Change the language
By default the language of the S3b control panel is set to English. If you wish to change the system
language, refer to the instructions page 18 of this manual. "System language" refers to the
language of the SMS you receive from the control panel.

Arm / Disarm the System

The alarm system can be armed or disarmed on the control panel, by SMS, by App and by phone call.
On the control panel: Refer to the instructions on page 9 of this manual.
By SMS
To arm the system: Send "1" by SMS to the number of your system's SIM card.
To disarm the system: Send "0" by SMS to the number of your system's SIM card.
By RFID tag (disarm only): Swipe the RFID tag in front of the RFID reader of the control panel.
To start receiving SMS notifications when the system is disarmed by RFID tag, you must store an SMS
number as explained on page 13 of this manual. If you have stored several SMS numbers, only the
first number stored will receive SMS notifications when the system is disarmed by RFID tag.
By app
In the app, click on "Arm" or "Disarm" to respectively arm or disarm the system.
The app is available for download on the App Store and Google Play (more information on etiger.com).
Register Wireless Accessories & RFID Tags
1. Type your password followed by the Connection button " " on the control panel to enter the
Connection Mode.
2. Trigger the accessory once within the next 15 seconds (for the RFID tag, swipe it in front of the
blue circle of the control panel). You hear one beep: the registration is successful.
Default password is 1234. To change the password, refer to instructions on page 17.
If the accessory has already been registered, the control panel will beep twice. The first accessory
registered is assigned to zone 1, the second accessory registered is assigned to zone 2, etc. Zones
1 to 9 can be renamed. Zones 10 to 50 cannot be renamed (refer to the instructions on page 15
to learn how to rename zones).
6

Speed Dial

This function is only available when the system is disarmed.
Press the Call button " " on the control panel for 3 seconds: the panel auto-dials the first stored
phone number. Press the Call button " " to end the call.
Hands-Free Phone Call from the Panel
This function is only available when the system is disarmed.
Type the phone number you wish to call and press the Call button " ".
Record / Play a Voice Memo
Long press the Record Voice Memo button { } to record a 10-second voice message. The Play Voice
Memo Button blinks when a message has been recorded.
Touch the centrer of the circle on the control panel to listen to the voice memo. The LED in-
dicator turns off when the voice memo is being played. Touch it again to replay the memo.
Hard Reset
Turn the control panel on (if the control panel is already on, turn it off and turn it on again).
Press the tamper switch at the back of the control panel 5 times within 5 seconds after
having turned it on.
Settings will be restored to default values. Stored phone numbers and connected
accessories will be cleared.
7