Brymen BM157 User Manual page 14

13
●When the reading is stable, press " " button momentarily to enter the second
measuring value.
L3", and
●Then clamp the jaws around "Line 3" as reminded by annunciators "
connect Black test probe (COM terminal) to "Line n (neutral)" and Red test probe (+
terminal) to "Line 3" as reminded by annunciators " " on mini-display.
●When the reading is stable, press " " button momentarily to enter the third
measuring value. The meter will then calculate, store and display the total 3-Phase
L1 L2 L3" turn on.
Power result automatically. Annunciators "
● Press " " button momentarily again for new measurements.
●Press "SELECT" button momentarily to view (
" "
) the last stored result.
Annunciator " " turns on & flashes. Press "SELECT" button momentarily again to
" "
continue ( ).