16 - Specifications; Rating; Input/Output Ratings - Tascam dr-44wl Reference Manual

16 – Specifications

Rating

Recording media
SD card (64 MB - 2 GB)
SDHC card (4 GB - 32 GB)
SDXC card (48 GB - 128 GB)
Recording/playback formats
BWF: 44.1k/48k/96kHz, 16/24 bit
WAV: 44.1k/48k/96kHz, 16/24 bit
MP3: 44.1k/48kHz, 32k/64k/96k/128k/192k/256k/320kbps
Number of channels
4 channels
• 4CH mode
Mono: Up to 4 files
Stereo: Up to 2 files
Stereo (1 file) + mono (up to 2 files)
• MTR mode
Mono: Up to 4 files

Input/output ratings

Analog audio input and output ratings
EXT MIC/LINE IN jack (supporting phantom power supply)
Connector: Combo type
XLR-3-31
(1: GND, 2: HOT, 3: COLD)
6.3 mm (1/4") TRS standard jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
When the EXT IN switch is at MIC, or at
MIC+PHANTOM
Input impedance: 2.2 kΩ or more
Reference input level: -17.3 dBu ± 2 dB
Maximum input level: -1.3 dBu ± 2 dB
When the EXT IN switch is at LINE
Input impedance: 2.2 kΩ or more
Reference input level: +4 dBu
Maximum input level: +20 dBu
/LINE OUT jack
Connector: 1/8" (3.5 mm) stereo mini jack
Output impedance: 12 Ω
Reference output level: -14 dBV (with 10 kΩ load)
Maximum output level: +2 dBV (with 10 kΩ load)
Maximum output: 20 mW + 20 mW (with headphones
connected, with 32 Ω load)
Built-in speaker
0. 3 W (mono)
Control input/output ratings
USB port
Connector: Micro-B type
Format: USB 2.0 HIGH SPEED mass storage class
60
TASCAM DR-44WL
Audio performance
Frequency response
20-20 kHz +1/−3 dB
(EXT IN to LINE OUT, 44.1 kHz sampling frequency,
JEITA)
20-22 kHz +1/−3 dB
(EXT IN to LINE OUT, 48 kHz sampling frequency, JEITA)
20-40 kHz +1/−3 dB
(EXT IN to LINE OUT, 96 kHz sampling frequency, JEITA)
Distortion
0.05% or less
(EXT IN to LINE OUT, 44.1/48/96 kHz sampling frequency,
JEITA)
S/N ratio
92 dB or higher
(EXT IN to LINE OUT, 44.1/48/96 kHz sampling frequency,
JEITA)
Note) Based on JEITA: JEITA CP-2150
Requirements for connected
computers
Please visit the TEAC Global Site (http://teac-global.com) to
learn the latest compatible OS.
Windows
Pentium 300 MHz or more
128 MB or more memory
USB port (USB2.0 is recommended)
Mac
Power PC, iMac, G3, or G4 with 266 MHz or above
64MB or more memory
USB port (USB2.0 is recommended)
Recommended USB host controller
Intel chip set
Supported operating systems
Windows: Windows XP, Windows Vista, Windows 7, Windows
8 (including 8.1)
Macintosh: Mac OS X 10.2 or later
Wi-Fi
Wireless standard
Based on IEEE 802.11b/g/n (2.4 GHz only)
Wireless communication mode
Simple access point (Limited AP)
Security
WPA2-PSK (WPS2.0 compatible)