Mixing Down; Loading Master Tracks (Mtr Mode Only) - Tascam dr-44wl Reference Manual

Mixing down

This function combines multiple files into a single stereo file.
Adjustments of the effect level (
( ), volume balance (
PAN LEVEL
screen. (See "Setting the mixer" on page 46.)
MIXER
1. Use the .// button to select file you want to mix
down on the screen for 4CH operation mode
BROWSE
or on the screen for MTR operation mode. (See
SONG
"Selecting Operation Mode" on page 17.)
2. While the Home Screen is open when stopped or paused,
press the QUICK button to open the Quick pop-up menu.
3. Using the wheel, select (highlight)
the ENTER/MARK button.
The following confirmation message will pop-up:
Popup display in 4CH mode
4. Press ENTER/MARK button to start mixing down return to
the Home screen after mixing down.
Press the 8/HOME button to return to the Home screen
without mixing down files.
5. After mixdown completes, the Home screen reopens, and
the mixdown file that was created is loaded. In this state, you
can press the 7/9 button to play the mixdown file.
NOTE
• When a mixdown file is created, it is named by adding an
incremental number to the end of the name of the file used
before mixdown.
• When files created in 4CH mode are mixed down, a file is
created with "MIX" added to the end of the file name.
), right and left positions
SEND
) can be freely set on the
and press
MIXDOWN
8 – QUICK Button Operation
Loading master tracks (MTR mode
only)
A file mixed down from files created in MTR mode can be
loaded.
1. Set the operation mode to
Mode" on page 17.)
2. Load the mixdown file on the
Songs" on page 34.)
3. While the Home Screen is open when stopped or paused,
press the QUICK button to open the Quick pop-up menu.
4. Use the wheel to select
MASTER TRACK
the ENTER/MARK button. This loads the master track and
reopens the Home screen.
NOTE
The icon appears at the top of the Home screen when
a master track is loaded.
If there is no master file, a
pop-up message will appear.
5. Press the 7/9 button to start playback of the master file.
NOTE
After loading the master track, select
from the Quick menu and press the ENTER/MARK button to
return to ordinary MTR mode.
. (See "Selecting Operation
MTR
screen. (See "Loading
SONG
and press
NO MASTER TRACK
MULTI TRACK
45
TASCAM DR-44WL