Metronome Function (Compatible With V1.10); Reverb Function; Setting The Reverb Function - Tascam dr-44wl Reference Manual

10 – Useful functions
10. Once tuning has been completed, set
and press 8/HOME button to return to the Home screen.
Metronome function (compatible with
V1.10)
Metronome operates when the
1. Press the MENU button to open the
2. Using the wheel, select (highlight)
ENTER/MARK or / button.
screen appears.
TOOLS
3. Use the wheel to select
METRONOME
ENTER/MARK or / button.
the item.
METRONOME
4. Press the ENTER/MARK button to open the
screen.
METRONOME
Set the following items on the
TEMPO
Set speed between
20
(default value: )
120
BEAT
Set beat between -
1 9
This will accent the first beat.
SOUND
You can set the metronome sound to
or . (default value:
BELL
LEVEL
Set the metronome volume between
(default value: )
50
5. Use the wheel to select the item to set and press the ENTER/
MARK button. This shows the parameters for the item to be
set.
6. Use the wheel to select the value. Press the ENTER/MARK
button to confirm it and enable selection of other setting
items.
7. Repeat steps 5 and 6 as necessary.
8. Press the 7/9 button to start the metronome. Press the
7/9 button to stop the playing metronome.
48
TASCAM DR-44WL
to
SOUND OFF
screen is open.
METRONOME
screen.
MENU
and press the
TOOLS
and press the
appears selected for
Exec
screen.
METRONOME
- (BPM).
250
(default value: )
4
,
CLICK STICK
)
CLICK
and .
0 100
9. Once the setting has been completed, press the 8/HOME
button to return to the Home screen.

Reverb function

A reverb is incorporated into this unit.
When recording or practicing, the input signal can be reverbed
or the playback signal can be reverbed during playback.
When reverb function is ON, the
top of the home screen.

Setting the reverb function

1. Press the MENU button to open the
2. Using the wheel, select (highlight)
ENTER/MARK or / button.
The screen is displayed.
REVERB
The screen has four setting items.
REVERB
REVERB:
Set the reverb on/off status (default value:
TYPE:
See the reverb type from the pre-set items. See (See
"How to download and install the exclusive application
(TASCAM DR CONTROL)" on page 51.) for more details
on reverb types.
SOURCE:
You can select input/output source to be reverbed from
the following: (default value:
SOURCE (options) Detail
Enabled for SEND:
Reverb can be added to the
MIX (default value) output sound.
The recorded sound is not
affected.
Enabled for input:
Reverb can be added to the sound
INT MIC input from the built-in mic.
Sound can be recorded with
reverb added.
Enabled for input:
Reverb can be added to the sound
input from external mics and
EXT IN
devices.
Sound can be recorded with
reverb added.
icon will appear at the
REVERB icon
screen.
MENU
and press the
REVERB
).
OFF
)
MIX