Reverb Type Pre-Set List - Tascam dr-44wl Reference Manual

Hide thumbs Also See for dr-44wl:

Owner's manual (76 pages)

Owner's manual (84 pages)

Reference manual (66 pages)

Table Of Contents

Table of Contents

When

is sent, the forwarding level (SEND) to the

MIX

effect of each signal can be set on the

(See "Setting the mixer" on page 46.)

LEVEL:

Use this to change the input/output level of the sound set

with

to which reverb is applied. Settings can

SOURCE

be selected from

100

3. Use the wheel to select (highlight) the desired item and

press the ENTER/MARK or / button to set options/

values.

4. Use the wheel to set the desired option/value.

5. Press the ENTER/MARK button to confirm the setting and

enable selection of other setting items.

6. Once the setting has been completed, press the 8/HOME

button.

CAUTION

When sampling frequency is set to 96 kHz or the WAV file

with 96 kHz sampling frequency is played back, the reverb

function does not work. In this case, reverb can be set.