Setting The Date/Time Of The Internal Clock - Panasonic AJ-PX800G Operating Instructions Manual

Setting the date/time of the internal clock

The value of the time is recorded to content (clips) and affects the thumbnail playback order. Before recording, be sure to check and set the date and
time zone.
1
Press the <MENU> button for 3 seconds or more.
f The main menu screen is displayed in the viewinder.
Select the main menu → [OTHER FUNCTIONS] → [CLOCK SETTING] to set the year, month, day, and time.
2
For details on the settings menu, refer to "Setting menu basic operations" (page 117).
Select the main menu → [OTHER FUNCTIONS] → [TIME ZONE] to set the time difference from Greenwich Mean Time.
3
r Time zone table
Time difference
00:00 Greenwich
−00:30
−01:00 Azores
−01:30
−02:00 Mid-Atlantic
−02:30
−03:00 Buenos Aires
−03:30 Newfoundland
−04:00 Halifax
−04:30
−05:00 New York
−05:30
−06:00 Chicago
−06:30
−07:00 Denver
−07:30
−08:00 Los Angeles
−08:30
−09:00 Alaska
−09:30 Marquesas Islands
−10:00 Hawaii
−10:30
−11:00 Midway Islands
−11:30
−12:00 Kwajalein Atoll
+00:30
@
NOTE
t Be sure to make this setting before using the camera for the irst time. After, do not change the setting during use.
t Clock accuracy is a lunar inequality of approximately ±30 seconds with the power off. When accurate time is required, check and reset the time when
the power is turned on.
t The built-in clock runs for several years on the built-in lithium cell of the camera. When the lithium cell runs low,
when the camera is turned on. For details, refer to "Maintenance" (page 194).
Chapter 3 Preparation — Setting the date/time of the internal clock
Region Time difference
+01:00 Central Europe
+01:30
+02:00 Eastern Europe
+02:30
+03:00 Moscow
+03:30 Tehran
+04:00 Abu Dhabi
+04:30 Kabul
+05:00 Islamabad
+05:30 Bombay
+06:00 Dakar
+06:30 Yangon
+07:00 Bangkok
+07:30
+08:00 Beijing
+08:30
+09:00 Tokyo
+09:30 Darwin
+10:00 Guam
+10:30 Lord Howe Island
+11:00 Solomon Islands
+11:30 Norfolk Island
+12:00 New Zealand
+12:45 Chatham Islands
+13:00
– 41 –
Region
will be displayed in the viewinder