Panasonic AJ-PX800G Operating Instructions Manual page 129

Item
[CPS PASSWORD]
[SD CARD]
[REMAIN SETUP]
[FREE CAP. OF
PARTITION]
[THUMBNAIL SETUP] [INDICATOR]
[DATA DISPLAY]
[THUMBNAIL SIZE]
[PB POSITION]
[PROPERTY DISP.]
[THUMBNAIL INFO.]
Chapter 6 Menu Operations — Menu list
Sets the CPS encrypted password of the microP2 memory card.
[LOAD]: Loads CPS password from an SD memory card.
[SET]: Enters the CPS password.
[DELETE]: Deletes the password saved to the device, and disables encrypted formats.
Displays SD memory card information.
Sets which is displayed, remaining capacity or used capacity, when P2 card information is displayed.
[REMAIN]: Displays remaining capacity.
[USED]: Displays used capacity.
f Factory setting: [REMAIN]
Displays available space in a partition.
Selects an item to display and press the <SET> button. Checked items are displayed. When [ALL HIDE] is
selected, other items cannot be selected.
[ALL HIDE]: Hides all indicators.
[MARKER]: Displays the shot mark indicator.
[TEXT MEMO]: Displays the text memo indicator.
[WIDE]: Displays the wide indicator.
[PROXY]: Displays the proxy indicator.
f Factory setting: [MARKER], [TEXT MEMO], [WIDE], [PROXY]
Selects the content to be displayed in the time code display area.
[TC]: Displays the time code.
[UB]: Displays the user bits.
[TIME]: Displays the record time.
[DATE]: Displays the record date.
[DATE TIME]: Displays the record date and time.
[CLIP NAME]: Displays clip names.
[USER CLIP NAME]: Displays a maximum of the irst 15 letters (for an English language display) of a user
clip name.
[SLOT]: Displays slot number.
[THUMBNAIL TC]: Displays the time code of the thumbnail position.
f Factory setting: [TC]
Sets the thumbnail size displayed in a thumbnail on the screen.
[SMALL]: Small (thumbnail display: with 4×3 and property display)
[MEDIUM]: Standard (thumbnail display: 4×3)
[LARGE]: Large (thumbnail display: 3×2)
f Factory setting: [MEDIUM]
Sets the playback start position during playback from the thumbnail screen.
[RESUME]: Plays back from the position where playback stopped.
[THUMBNAIL TC]: Plays back from the time code of the thumbnail position.
[START TC]: Plays back from the start time code (beginning of the clip).
f Factory setting: [START TC]
Sets simple properties item displayed on the left of the thumbnail when [SMALL] is selected for
[THUMBNAIL SIZE].
[USER CLIP NAME]: Displays the user clip name.
[START TC]: Displays the start time code.
[REC DATE]: Displays the recorded date.
[REC TIME]: Displays the recorded time.
[NUM. OF AUDIO CH]: Displays the number of audio channels.
[AUDIO RATE]: Displays the audio sampling rate.
[AUDIO BIT]: Displays the audio bitrate.
[CREATOR]: Displays the person who recorded the clip.
[SHOOTER]: Displays the videographer.
[PLACE NAME]: Displays the shooting location.
[PROGRAM NAME]: Displays the program name.
[SCENE NO.]: Displays the scene number.
[TAKE NO.]: Displays the take number.
[REPORTER]: Displays the reporter.
[PURPOSE]: Displays the purpose of shooting.
[OBJECT]: Displays the object of shooting.
[START UB]: Displays the start user bits.
[REC RATE]: Displays the recording frame rate.
[LAST UPDATE]: Displays the date of last update.
[LAST UP PERSON]: Displays the last person who updated.
[MANUFACTURER]: Displays the equipment manufacturer name.
[SERIAL NO.]: Displays the serial number.
[MODEL NAME]: Displays the model name.
[ALTITUDE]: Displays an altitude.
[LONGITUDE]: Displays a longitude.
[LATITUDE]: Displays a latitude.
[1ST TEXT MEMO]: Displays the irst text memo content.
[THUMBNAIL OFFSET]: Displays the thumbnail recording position.
Displays the number of selected clips and playback time of clip, etc.
[NUM. OF CLIPS]: Displays the number of selected clips at the lower right of the thumbnail screen.
[DUR. OF SEL CLIPS]: Displays the total playback time of selected clips.
[TOTAL DURATION]: Displays the total playback time of the displayed clip.
f Factory setting: [NUM. OF CLIPS]
– 129 –
Description of settings