Panasonic AJ-PX800G Operating Instructions Manual page 111

@
NOTE
t To delete each item in [LOCATION] (shooting location data) of [SHOOT], the item cannot be deleted alone. By setting the [ALTITUDE] item to empty,
other [LONGITUDE] and [LATITUDE] items are collectively deleted.
t Metadata of clips with (incomplete clip indicator) cannot be repaired. Repair of metadata of clips recorded across multiple P2 cards must be
performed after inserting all of the P2 cards.
t Any [MEMO] with 101 characters or more cannot be modiied.
Displaying P2 card status
r P2 card status display settings
You can select the P2 card status display from either remaining capacity or used capacity of the P2 card.
1
Press the <THUMBNAIL> button.
The thumbnail screen appears on the viewinder.
Select [REMAIN] (remaining capacity) or [USED] (used capacity) in the main menu → [CLIP] → [PROPERTY] → [REMAIN SETUP].
2
(Fig. 1)
r P2 card status display items
[REMAIN]
[USED]
Contents of P2 card status display settings
Select [CARD STATUS] in the main menu → [CLIP] → [PROPERTY].
r When [REMAIN] is selected
r When [USED] is selected
Chapter 5 Playback — Thumbnail operations
Displays remaining capacity on the P2 card as the P2 card status display. (Factory setting)
Displays used memory capacity on the P2 card as the P2 card status display.
1
3
4
1
3
4
2
2
– 111 –
5
5