Hd/Sd Sdi Input Board (Ag-Ya600G) - Panasonic AJ-PX800G Operating Instructions Manual

Chapter 12 Additional Functions from the Optional Board — HD/SD SDI input board (AG-YA600G)

HD/SD SDI input board (AG-YA600G)

High-quality recording through the digital input is possible using the <SDI OUT/IN (OP)> terminal by installing the HD/SD SDI input board AG-YA600G
(optional).
When installing the board, consult the shop of purchase. For instructions to install the board, refer to the installation guide supplied with the HD/SD SDI
input board.
r HD/SD SDI input board (AG-YA600G)
f SDI input settings
To record SDI input signal on the camera, select [SDI] in the main menu → [SYSTEM MODE] → [REC SIGNAL]. (page 124)
Item
[REC SIGNAL] Switches the input signal. At this time, SDI signal is output from the <SDI OUT/IN (OP)> terminal.
[CAM]: Records the camera shooting signal of the camera.
[SDI]: Record the input from the <SDI OUT/IN (OP)> terminal.
f Factory setting: [CAM]
Once the power is turned off, it is always set to [CAM] the next time power is turned on.
– 201 –
Description of settings