Panasonic AJ-PX800G Operating Instructions Manual page 167

Chapter 9 Connecting to External Devices — Connection through the <USB2.0> terminal
1
Open the explorer screen.
Partitions or folders are displayed in a list.
2
Use the cursor buttons to place the cursor on the partition or folder you want to display on the thumbnail screen, and press the
<SET> button.
This displays the thumbnails of clips in the partition or folder. You can go back to the main explorer screen by clicking the <EXIT> button.
@
NOTE
t When target partitions are selected, you can display thumbnails in all partitions selected as targets by pressing the <SET> button while holding down
the <SHIFT> button.
r Information display items
1 Storage device information
For [TYPE S]
[SERIAL]
[MODEL]
[SELECTED PART.]
[SELECTED PART. NO.]
[NO.]
[DATE]
[TIME]
[VERIFY]
[NAME]
[SIZE]
[USED]
[FREE CAP.]
For [FAT]
[SELECTED PART.]
[SELECTED PART. NO.]
[NO.]
[DATE]
[TIME]
[FOLDER]
[SIZE]
[FREE CAP.]
1
P2 card serial number
P2 card model name
Displays a checkmark when a target partition is selected
List of selected partition numbers (only displayed when multiple partitions are selected)
Partition number
Partition record date
Partition record time
Veriication settings and results during recording, [ON/FAILED]
f [ON/FINISHED]: Veriication performed. Items match.
f [ON/FAILED]: Veriication performed but no match found. (For [P2STORE], [−−] is displayed.)
f [OFF]: Veriication not performed
Partition name deined by the user
Total capacity of the storage device
Used storage device capacity
Remaining storage device capacity
Displays a checkmark when a target partition is selected
List of selected folder numbers (only displayed when multiple folders are selected)
Folder number
Folder creation date
Folder creation time
Folder name (creation date and time are not displayed in the root folder)
Total capacity of the storage device
Remaining storage device capacity
<SET>
<EXIT>
– 167 –