Changing Thumbnails - Panasonic AJ-PX800G Operating Instructions Manual

Setting the clip information display
You can customize the clip information display contents according to your preference.
Select [DATA DISPLAY] in the main menu → [CLIP] → [THUMBNAIL SETUP].
1
2
Use the cursor buttons to place the cursor on the item you want to set.
3
Press the <SET> button.
Setting items that display properties
You can set simple properties item displayed on the left of the thumbnail.
1
Open the thumbnail screen. (Fig. 1)
Select [PROPERTY DISP.] in the main menu → [CLIP] → [THUMBNAIL SETUP].
2
3
Press the <SET> button to enter the item menu. (Fig. 2)
The selected item has a check mark on it.
4
Press the <SET> button.
Pressing the <SET> button will check unchecked items and uncheck items that are already checked.
@
NOTE
t Property items can be displayed by selecting [SMALL] in the main menu → [CLIP] → [THUMBNAIL SETUP] → [THUMBNAIL SIZE].
t A maximum of six items can be displayed at the same time.
t When six items are already selected, all unchecked items cannot be selected. You can change your item selection by unchecking selected items.
Displaying the number of clips and playback time
Display the number of selected clips and playback time of clip, etc.
Select [THUMBNAIL INFO.] from the main menu → [CLIP] → [THUMBNAIL SETUP].
1
2
Use the cursor buttons to place the cursor on the item you want to set.
[NUM. OF CLIPS]: Displays the number of selected clips.
[DUR. OF SEL CLIPS]: Displays the total playback time of selected clips.
[TOTAL DURATION]: Displays the total playback time of the displayed clip.
3
Press the <SET> button.

Changing thumbnails

Replace thumbnails with images that include previously attached text memos while images are recorded or played back.
Chapter 5 Playback — Thumbnail operations
Fig. 1
– 103 –
Fig. 2