Convenient Shooting Functions; Scan Reverse Shooting; Zebra Patterns Display; Displaying The Center Marker - Panasonic AJ-PX800G Operating Instructions Manual

Convenient shooting functions

Scan reverse shooting

Set [ON] in the main menu → [SYSTEM MODE] → [SCAN REVERSE] to display and record the image in vertically or horizontally reverse.

Zebra patterns display

The camera can display two types of zebra patterns.
When the <ZEBRA> switch of the viewinder is set to <ON>, the zebra pattern currently set in the menu is displayed.
Zebra patterns can also be displayed in the video from the <MON OUT> terminal according to the menu setting.
The level for zebra pattern display can be set in the main menu → [DISPLAY SETUP].
Item
[ZEBRA1 DETECT]
[ZEBRA2 DETECT]
[ZEBRA2]
[SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern.
To display the zebra pattern in the image from the monitor output terminal (<MON OUT>, <HDMI>), set using either of the following operations.
f In the main menu → [IN/OUT SEL] → [MON/HDMI ZEBRA], set [ON].
f In the [SET03:MON/HDMI SETUP] screen of SmartUI, set [ZBR] to [ON].

Displaying the center marker

Displays when setting an item other than [OFF] in the main menu → [DISPLAY SETUP] → [CENTER MARK].
@
NOTE
t The center marker display is not displayed in the images of terminals <SDI OUT/IN (OP)>, <MON OUT>, and <HDMI>.

Displaying the safety zone marker

The items you select the main menu → [DISPLAY SETUP] → [SAFETY MARK] are displayed.
The size of the safety zone marker can be changed in the main menu → [DISPLAY SETUP] → [SAFETY AREA].
@
NOTE
t The safety zone marker display is not displayed in the images of terminals <SDI OUT/IN (OP)>, <MON OUT>, and <HDMI>.
Chapter 4 Shooting — Convenient shooting functions
Sets the extraction level of zebra pattern 1.
[0%]...[109%]
f Factory setting: [70%]
Sets the extraction level of zebra pattern 2.
[0%]...[109%]
f Factory setting: [85%]
Sets on/off of zebra pattern 2 and selects the type.
[ON], [SPOT], [OFF]
f Factory setting: [SPOT]
Image level
[ON]
[109%]
[ZEBRA2 DETECT]
[ZEBRA1 DETECT]
[0%]
Description of settings
[ZEBRA2]
[OFF] [SPOT]
– 96 –