Ftp Server Folder List (Ftp Explorer Screen) - Panasonic AJ-PX800G Operating Instructions Manual

FTP server folder list (FTP explorer screen)

The information and subfolder list of folders in the FTP server can be displayed. You can also display the thumbnail list of a desired CONTENTS folder
(folder storing clips of P2 card).
1
Press the <THUMBNAIL> button.
The thumbnail screen is displayed.
Select [FTP] in the main menu → [CLIP] → [EXPLORE].
2
The FTP explorer screen appears.
FTP explorer screen
1 Status indication
Indicates that the screen is the FTP explorer screen.
2 FTP server information
[URL]: The address of the connected FTP server
[USER ID]: ID of the user who has logged in
[SSH]: [ENABLE]/[DISABLE] indication of [SSH]
3 Media status
Indicates the P2 card insertion status, hard disk connection status, type, and network connection status.
For the indicators of media status, refer to "Status displays for card slot, storage device, and network connection" (page 100).
@
NOTE
t The display of the network status indicator is updated a few seconds behind the actual state.
4 Folder information
[PATH]: The path of the current folder on the FTP server
[NO.]: Folder number
[FOLDER NAME]: Folder name
[DATE]: Date of last update
[TIME]: Time of last update
@
NOTE
t The folder list displays only folders, and does not display ordinary iles or link iles.
t [ . ] indicates the current folder. No date and time information is displayed.
t The date and time information displays either local time or world standard time, which depends on the information from the FTP server. In some cases,
only the year or time is displayed.
t Whether text is case sensitive or not depends on the FTP server.
t Folder names using multi-byte characters are not displayed correctly.
t Up to 100 folders can be displayed in one folder. The 101st folder and subsequent folders cannot be accessed from the FTP explorer screen.
However, if you have directly entered the folder name in the main menu → [NETWORK SETUP] → [CLIENT SERVICE] → [FTP SERVER URL], you
can access the folder even when it is the 101st or later.
t Connectivity and folder appearance may differ from those when connected to an FTP server with a computer, etc.
t Depending on the FTP server and the connection environment, error messages may not be displayed correctly.
t To discontinue the connection procedure, press the <SET> button.
t If an error occurs, perform the operation again.
t An error may occur when a network operation is performed immediately after inserting a LAN cable or connecting via wireless LAN, or when an
operation is performed again immediately after cancelling the previous operation.
t If connection error persists after several times of attempt, check the main menu → [NETWORK SETUP] → [NETWORK TOOL] → [PING]. Note that
connection to FTP may succeed even when [PING] fails. If connection cannot be established even after checking with PING, consult your system
administrator in charge of your network environment.
t When [PING] fails, check the following items.
- Network coniguration is correct
- LAN cable is correctly inserted
- Hubs and routers in the path operates normally
t When connection is not established even after [PING] has succeeded, check the following items.
- Server function services of the FTP server are running
- There is not a irewall in the communication path
- User ID and password that permits access to the FTP server have been set
t Some on-screen operations may not be possible for a while after the use of FTP client function has been cancelled.
Chapter 10 Network Connection — Using FTP client function
1
2
– 186 –
3
4