Setting The Date/Time Of The Internal Clock - Panasonic HC-X2050 Operating Instructions Manual

Setting the date/time of the internal clock

The date/time/time zone are recorded as meta data in the clip while shooting.
This will affect the management of recorded clips, so always check and set the date/time and time zone before using the unit for the first time.
Do not change the setting of the date/time and time zone while shooting.
1
Press the <MENU> button.
The menu is displayed.
2
Select the [OTHERS] menu  [CLOCK]  [TIME ZONE], and set the time difference from Greenwich Mean Time.
3
Select the [OTHERS] menu  [CLOCK]  [CLOCK SETTING], and set the year, month, date, and time.
∫ Time zone table
Time difference
i0:00 Greenwich
j0:30
j1:00 Azores
j1:30
j2:00 Mid-Atlantic
j2:30
j3:00 Buenos Aires
j3:30 Newfoundland
j4:00 Halifax
j4:30 Caracas
j5:00 New York
j5:30
j6:00 Chicago
j6:30
j7:00 Denver
j7:30
j8:00 Los Angeles
j8:30
j9:00 Alaska
j9:30 Marquesas Islands
j10:00 Hawaii
j10:30
j11:00 Midway Islands
j11:30
j12:00 Kwajalein Atoll
@ NOTE
0 Accuracy of the clock is approximately n30 seconds per month. Check and reset the time when accurate time is required.
0 Due to the format specifications, with AVCHD format, the following time difference conversions are made for recording with the clip.
Time difference set in [TIME ZONE]
Chapter 3 Preparation — Setting the date/time of the internal clock
Region
i12:45
Time difference
i0:30
i1:00 Central Europe
i1:30
i2:00 Eastern Europe
i2:30
i3:00 Moscow
i3:30 Tehran
i4:00 Abu Dhabi
i4:30 Kabul
i5:00 Islamabad
i5:30 Mumbai
i6:00 Dakar
i6:30 Yangon
i7:00 Bangkok
i7:30
i8:00 Beijing
i8:30
i9:00 Tokyo
i9:30 Darwin
i10:00 Guam
i10:30 Lord Howe Island
i11:00 Solomon Islands
i11:30
i12:00 New Zealand
i12:45 Chatham Islands
i13:00 Phoenix Islands
Time difference recorded with AVCHD clips
- 37 -
Region
i12:30