Extend Sequence Data To - E-Mu MP-7 command station Owner's Manual

Extend Sequence
Data To
86 E-MU Systems
This feature lets you change the length of any selected tracks after
recording a pattern. If you are lengthening a pattern, the pattern is looped
to fill in the empty space. If you set the length shorter than the existing
pattern, the pattern will be truncated.
You can set the pattern length before you extend so that only those
bars will be copied. The copied data will be merged with the data in the
subsequent bars of the pattern.
1. Set Pattern
Length to 1-bar
2. Extend Sequence
Data to 4-bars
To Extend the Length of Selected Tracks
Select the pattern you wish to extend.
1.
Select the Track(s) that you want to extend using the Track Enable/
2.
Mute buttons.
Press the Pattern Edit button from pattern mode.
3.
Scroll to the Pattern Length screen and set the length to the measures
4.
you wish to extend. For example, if you want to copy the first measure,
set the length to 1.
Scroll to Extend Sequence Data using the data entry control.
5.

EXTEND SEQUENCE DATA TO

bar: 8
Move the cursor to the lower line of the display and select the new
6.
pattern length.
Press Enter. The following screen appears.
7.
--- PERFORM OPERATION? ---
Enter = Yes
Press Enter again to extend the pattern or any other menu button to
8.
cancel the operation.
To Extend the 1st Bar over 4 Bars
Bar 1 Bar 2 Bar 3
Bar 1 Bar 2 Bar 3
Other = Cancel
Sequencer
Pattern Edit Menu
Bar 4
Bar 4