Channel Pan; Channel Arpeggiator - E-Mu MP-7 command station Owner's Manual

Channel Pan

Channel Arpeggiator

46 E-MU Systems
Channel Pan sets the stereo position of the selected MIDI channel. This
control operates like the balance control on your home stereo system.
Channel Pan is the same parameter as MIDI pan controller #10, and
changes made over MIDI are shown in the display.
C01 V127
3
079
Note: Pan settings in the preset ADD algebraically with the Channel Pan
setting. Therefore, if the pan setting in the preset were set to "63
the Channel Pan setting full left would return the sound to the center
position.
To Change the Channel Pan
Press the Preset View button to display the Preset Select screen.
1.
Press either cursor key until the cursor is underneath the pan field.
2.
Rotate the data entry control to select a pan value. 64
3.
left pan, 63 indicates a hard right pan. With a setting of "00," the
R
sound is centered in the stereo field.
This function controls the arpeggiator for each MIDI channel. When the
channel arpeggiator mode is set to Off, then there is no arpeggiation on
that channel, regardless of what is set up in the Master Arpeggiator or
preset. If the channel arpeggiator is On, the preset's arpeggiator is used,
regardless of whether or not it is turned on in the Preset Edit menu. This
lets you turn on arpeggiation from the main screen.
If the mode is set to "P" (for preset), the preset's arpeggiator settings and
on/off status is used. If the mode is set to "M" (for master), the master
arpeggiator settings and on/off status (located in the Arp menu) are used.
See the "Arpeggiator/Beats Menu" on page 243 for more information.
To Play the Arpeggiator (Quick Start)
From the Preset View screen, press either cursor key repeatedly until
1.
the cursor is underneath the arpeggiator field (A:).
Rotate the data entry control to select "P" for preset.
2.
Press either cursor key repeatedly until the cursor is underneath the
3.
Preset Category field and select "arp:" using the data entry control.
Press the right cursor button to move it to the Preset Name field.
4.
Play notes or chords on the keyboard. Change presets as desired to
5.
audition the various patterns and presets.
Pan Position
P01 A:off
R
bts: Logic
Basic Operations
Preset Screen
User
," moving
R
indicates a hard
L